22

✏️ Editing: ImfTimeCode.h

///////////////////////////////////////////////////////////////////////////
//
// Copyright (c) 2004, Industrial Light & Magic, a division of Lucas
// Digital Ltd. LLC
// 
// All rights reserved.
// 
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// *       Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// *       Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// *       Neither the name of Industrial Light & Magic nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission. 
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
///////////////////////////////////////////////////////////////////////////

#ifndef INCLUDED_IMF_TIME_CODE_H
#define INCLUDED_IMF_TIME_CODE_H

#include "ImfExport.h"
#include "ImfNamespace.h"

//-----------------------------------------------------------------------------
//
//	class TimeCode
// 	
// 	A TimeCode object stores time and control codes as described
// 	in SMPTE standard 12M-1999.  A TimeCode object contains the
// 	following fields:
//
// 	    Time Address:
//
//		hours			integer, range 0 - 23
//		minutes			integer, range 0 - 59
//		seconds			integer, range 0 - 59
//		frame 			integer, range 0 - 29
//
// 	    Flags:
//
// 		drop frame flag		boolean
//		color frame flag	boolean
//		field/phase flag	boolean
//		bgf0			boolean
//		bgf1			boolean
//		bgf2			boolean
//
// 	    Binary groups for user-defined data and control codes:
//
//		binary group 1		integer, range 0 - 15
//		binary group 2		integer, range 0 - 15
//		...
//		binary group 8		integer, range 0 - 15
//
//	Class TimeCode contains methods to convert between the fields
//	listed above and a more compact representation where the fields
//	are packed into two unsigned 32-bit integers.  In the packed
//	integer representations, bit 0 is the least significant bit,
//	and bit 31 is the most significant bit of the integer value.
//
//	The time address and flags fields can be packed in three
//	different ways:
//
//	      bits	packing for	  packing for	    packing for
//	    		24-frame 	  60-field 	    50-field
//	    		film		  television	    television
//
//	     0 -  3	frame units	  frame units	    frame units
//	     4 -  5	frame tens	  frame tens	    frame tens
//	     6		unused, set to 0  drop frame flag   unused, set to 0
//	     7		unused, set to 0  color frame flag  color frame flag
//	     8 - 11	seconds units	  seconds units	    seconds units
//	    12 - 14	seconds tens	  seconds tens	    seconds tens
//	    15		phase flag	  field/phase flag  bgf0
//	    16 - 19	minutes units	  minutes units	    minutes units
//	    20 - 22	minutes tens	  minutes tens	    minutes tens
//	    23		bgf0		  bgf0		    bgf2
//	    24 - 27	hours units	  hours units	    hours units
//	    28 - 29	hours tens	  hours tens	    hours tens
//	    30		bgf1		  bgf1		    bgf1
//	    31		bgf2		  bgf2		    field/phase flag
//
//	User-defined data and control codes are packed as follows:
//
//	      bits	field
//
//	     0 -  3	binary group 1
//	     4 -  7	binary group 2
//	     8 - 11	binary group 3
//	    12 - 15	binary group 4
//	    16 - 19	binary group 5
//	    20 - 23	binary group 6
//	    24 - 27	binary group 7
//	    28 - 31	binary group 8
//
//-----------------------------------------------------------------------------

OPENEXR_IMF_INTERNAL_NAMESPACE_HEADER_ENTER

class IMF_EXPORT TimeCode
{
  public:

//---------------------
    // Bit packing variants
    //---------------------

enum Packing
    {
	TV60_PACKING,		// packing for 60-field television
	TV50_PACKING,		// packing for 50-field television
	FILM24_PACKING		// packing for 24-frame film
    };

//-------------------------------------
    // Constructors and assignment operator
    //-------------------------------------

TimeCode ();  // all fields set to 0 or false

TimeCode (int hours,
	      int minutes,
	      int seconds,
	      int frame,
	      bool dropFrame = false,
	      bool colorFrame = false,
	      bool fieldPhase = false,
	      bool bgf0 = false,
	      bool bgf1 = false,
	      bool bgf2 = false,
	      int binaryGroup1 = 0,
	      int binaryGroup2 = 0,
	      int binaryGroup3 = 0,
	      int binaryGroup4 = 0,
	      int binaryGroup5 = 0,
	      int binaryGroup6 = 0,
	      int binaryGroup7 = 0,
	      int binaryGroup8 = 0);

TimeCode (unsigned int timeAndFlags,
	      unsigned int userData = 0,
	      Packing packing = TV60_PACKING);

TimeCode (const TimeCode &other);

TimeCode & operator = (const TimeCode &other);

//----------------------------
    // Access to individual fields
    //----------------------------

int		hours () const;
    void	setHours (int value);

int		minutes () const;
    void	setMinutes (int value);

int		seconds () const;
    void	setSeconds (int value);

int		frame () const;
    void	setFrame (int value);

bool	dropFrame () const;
    void	setDropFrame (bool value);

bool	colorFrame () const;
    void	setColorFrame (bool value);

bool	fieldPhase () const;
    void	setFieldPhase (bool value);

bool	bgf0 () const;
    void	setBgf0 (bool value);

bool	bgf1 () const;
    void	setBgf1 (bool value);

bool	bgf2 () const;
    void	setBgf2 (bool value);

int		binaryGroup (int group) const; // group must be between 1 and 8
    void	setBinaryGroup (int group, int value);

//---------------------------------
    // Access to packed representations
    //---------------------------------

unsigned int	timeAndFlags (Packing packing = TV60_PACKING) const;

void		setTimeAndFlags (unsigned int value,
					 Packing packing = TV60_PACKING);

unsigned int	userData () const;

void		setUserData (unsigned int value);
    
    
    //---------
    // Equality
    //---------
    
    bool		operator == (const TimeCode &v) const;    
    bool		operator != (const TimeCode &v) const;
    
  private:

unsigned int	_time;
    unsigned int	_user;
};

OPENEXR_IMF_INTERNAL_NAMESPACE_HEADER_EXIT

#endif

MR SKB