22

✏️ Editing: 300_create_extlinux.sh

# Create a suitable syslinux configuration based on capabilities

function get_usb_syslinux_version {
    for file in $BUILD_DIR/outputfs/{boot/syslinux,}/{ld,ext}linux.sys; do
        if [[ -s "$file" ]];  then
            strings $file | grep -E -m1 "^(EXT|SYS)LINUX " | cut -d' ' -f2
            return 0
        fi
    done
    return 1
}

function syslinux_needs_update {
    local usb_syslinux_version=$(get_usb_syslinux_version)
    local syslinux_version=$(get_syslinux_version)

Log "USB syslinux version: $usb_syslinux_version"
    Log "System syslinux version: $syslinux_version"
    if [[ "$usb_syslinux_version" ]] && version_newer "$usb_syslinux_version" "$syslinux_version"; then
        Log "No need to update syslinux on USB media (at version $usb_syslinux_version)."
        return 1
    else
        if [[ "$FEATURE_SYSLINUX_SUBMENU" ]]; then
            Log "Beware that older entries may not appear in the syslinux menu."
        fi
        return 0
    fi
}

function syslinux_has {
    local file="$1"

if [[ -e "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/$file" ]]; then
        if [[ "$SYSLINUX_NEEDS_UPDATE" ]]; then
            if [[ -e "$SYSLINUX_DIR/$file" ]]; then
                cp -f $v "$SYSLINUX_DIR/$file" "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/$file" >&2
            else
                # Make sure we don't have any older copies on USB media
                rm -f $v "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/$file" >&2
                return 1;
            fi
        else
            return 0
        fi
    else
        if [[ -e "$SYSLINUX_DIR/$file" ]]; then
            cp $v "$SYSLINUX_DIR/$file" "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/$file" >&2
        else
            return 1
        fi
    fi
}

# FIXME: Syslinux older than 3.62 do have menu.c32 but not submenu support
#        We simplify by disabling MENU support for everything older than 3.62
function syslinux_write {
    if [[ "$@" ]]; then
        echo "$@" | syslinux_write
    elif [[ "$FEATURE_SYSLINUX_SUBMENU" ]]; then
        cat >&4
    else
        awk '
BEGIN {
    IGNORECASE=1
    IN_TEXT=0
    IGNORE=0
}

/DEFAULT MENU.C32/ { IGNORE=1 }
/ENDTEXT/ { IN_TEXT=0 }
/LABEL -/ { IGNORE=1 }
/MENU / { IGNORE=1 }
/TEXT HELP/ { IN_TEXT=1 }

{
    if (IN_TEXT) { IGNORE=1 }
    if (! IGNORE) {
        print
#    } else {
#        print "#" $0
    }
    if (! IN_TEXT) { IGNORE=0 }
}' >&4
    fi
}

if syslinux_needs_update; then
    SYSLINUX_NEEDS_UPDATE="y"
fi
set_syslinux_features $(get_usb_syslinux_version)

case "$WORKFLOW" in
    (mkbackup) usb_label_workflow="backup";;
    (mkrescue) usb_label_workflow="rescue image";;
    (*) BugError "Workflow $WORKFLOW should not run this script."
esac

USB_REAR_DIR="$BUILD_DIR/outputfs/$USB_PREFIX"
if [ ! -d "$USB_REAR_DIR" ]; then
    mkdir -p $v "$USB_REAR_DIR" >/dev/null
    StopIfError "Could not create USB ReaR dir [$USB_REAR_DIR] !"
fi

# We generate a single syslinux.cfg for the current system
Log "Creating $USB_PREFIX/syslinux.cfg"
# FIXME: # type -a time
#        time is a shell keyword
#        time is /usr/bin/time
time=$(basename $USB_REAR_DIR)
if test $USB_SUFFIX ; then
    # USB_SUFFIX specifies the last part of the backup directory on the USB medium
    # and then basename $USB_REAR_DIR can be anything so that we use it as is:
    menu_label="$time"
else
    # When USB_SUFFIX is unset, empty, or contains only blanks
    # basename $USB_REAR_DIR is a timestamp of the form YYYYMMDD.HHMM
    menu_label="${time:0:4}-${time:4:2}-${time:6:2} ${time:9:2}:${time:11:2}"
fi
syslinux_write <<EOF 4>"$USB_REAR_DIR/syslinux.cfg"
label $HOSTNAME-$time
    menu label $menu_label $usb_label_workflow
    say $HOSTNAME-$time - Recover $HOSTNAME $usb_label_workflow ($time)
    text help
Relax-and-Recover v$VERSION - $usb_label_workflow using kernel $(uname -r) ${IPADDR:+on $IPADDR}
${BACKUP:+BACKUP=$BACKUP} ${OUTPUT:+OUTPUT=$OUTPUT} ${BACKUP_URL:+BACKUP_URL=$BACKUP_URL}
    endtext
    kernel /$USB_PREFIX/kernel
    append initrd=/$USB_PREFIX/$REAR_INITRD_FILENAME root=/dev/ram0 vga=normal rw $KERNEL_CMDLINE

label $HOSTNAME-$time
    menu label $menu_label $usb_label_workflow - AUTOMATIC RECOVER
    say $HOSTNAME-$time - Recover $HOSTNAME $usb_label_workflow ($time)
    text help
Relax-and-Recover v$VERSION - $usb_label_workflow using kernel $(uname -r) ${IPADDR:+on $IPADDR}
${BACKUP:+BACKUP=$BACKUP} ${OUTPUT:+OUTPUT=$OUTPUT} ${BACKUP_URL:+BACKUP_URL=$BACKUP_URL}
    endtext
    kernel /$USB_PREFIX/kernel
    append initrd=/$USB_PREFIX/$REAR_INITRD_FILENAME root=/dev/ram0 vga=normal rw $KERNEL_CMDLINE auto_recover

EOF

# Clean up older images of a given system, but keep USB_RETAIN_BACKUP_NR
# entries for backup and rescue when backup on USB works in default mode.
# When USB_SUFFIX is set the compliance mode is used where
# backup on USB works in compliance with backup on NFS which means
# a fixed backup directory and no automated removal of backups or other stuff
# see https://github.com/rear/rear/issues/1164
# Use plain $USB_SUFFIX and not "$USB_SUFFIX" because when USB_SUFFIX contains only blanks
# test "$USB_SUFFIX" would result true because test " " results true:
if ! test $USB_SUFFIX ; then
    backup_count=${USB_RETAIN_BACKUP_NR:-2}
    rescue_count=${USB_RETAIN_BACKUP_NR:-2}
    for rear_run in $(ls -dt $BUILD_DIR/outputfs/rear/$HOSTNAME/*); do
        # This fails when the backup archive name is not
        # ${BACKUP_PROG_ARCHIVE}${BACKUP_PROG_SUFFIX}${BACKUP_PROG_COMPRESS_SUFFIX}
        # so that in particular it would fail for incremental/differential backups
        # but incremental/differential backups on USB require USB_SUFFIX to be set:
        backup_name=$rear_run/${BACKUP_PROG_ARCHIVE}${BACKUP_PROG_SUFFIX}${BACKUP_PROG_COMPRESS_SUFFIX}
        if [[ -e $backup_name ]] ; then
            backup_count=$((backup_count - 1))
            if (( backup_count < 0 )); then
                Log "Remove older backup directory $rear_run"
                rm -rf $v $rear_run >/dev/null
            fi
        else
            rescue_count=$((rescue_count - 1))
            if (( rescue_count < 0 )); then
                Log "Remove older rescue directory $rear_run"
                rm -rf $v $rear_run >/dev/null
            fi
        fi
    done
fi

# We generate a ReaR syslinux.cfg based on existing ReaR syslinux.cfg files.
Log "Creating /rear/syslinux.cfg"
{
    syslinux_write <<EOF
label rear
    say Relax-and-Recover - Recover $HOSTNAME from $time
    menu hide
    kernel $HOSTNAME-$time

EOF

oldsystem=
    # TODO: Sort systems by name, but also sort timestamps in reverse order
    for file in $(cd $BUILD_DIR/outputfs; find rear/*/* -name syslinux.cfg); do
        dir=$(dirname $file)
        # FIXME: # type -a time
        #        time is a shell keyword
        #        time is /usr/bin/time
        time=$(basename $dir)
        system=$(basename $(dirname $dir))

Log "Processing $file"
        if [[ "$system" != "$oldsystem" ]]; then
            if [[ "$oldsystem" ]]; then
                # Close previous submenu
                syslinux_write "menu end"
            else
                # Begin recovery header at top
                syslinux_write <<EOF
label -
    menu label Recovery images
    menu disable

EOF
            fi

# Begin submenu
            syslinux_write <<EOF

menu begin $system
    menu label $system
    text help
Recover backup of $system to this system
    endtext

EOF
        fi

# Include entry
        if [[ "$FEATURE_SYSLINUX_INCLUDE" ]]; then
            syslinux_write "    include /$file"
        else
            cat $BUILD_DIR/outputfs/$file >&4
        fi
        oldsystem=$system
    done

if [[ "$oldsystem" ]]; then
        # Close last submenu
        syslinux_write <<EOF

menu separator

label -
        menu label ^Back
        menu default
        text help
Return to the main menu
        endtext
        menu exit

menu end

EOF
    fi

} 4>"$BUILD_DIR/outputfs/rear/syslinux.cfg"

if [ ! -d "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX" ]; then
    mkdir -p $v "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX" >/dev/null
    StopIfError "Could not create USB syslinux dir [$BUILD_DIR/outputfs/$SYSLINUX_PREFIX] !"
fi

echo "$VERSION_INFO" >$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/message

# We generate a main extlinux.conf in /boot/syslinux that consist of all
# default functionality
Log "Creating $SYSLINUX_PREFIX/extlinux.conf"
{
    # Enable serial console, unless explicitly disabled
    if [[ "$USE_SERIAL_CONSOLE" =~ ^[yY1] ]]; then
        for devnode in $(ls /dev/ttyS[0-9]* | sort); do
            speed=$(stty -F $devnode 2>/dev/null | awk '/^speed / { print $2 }')
            if [ "$speed" ]; then
                syslinux_write "serial ${devnode##/dev/ttyS} $speed"
            fi
        done
    fi

syslinux_write "display message"

# Add useful syslinux utilities, if present
    syslinux_has "cat.c32"
    syslinux_has "config.c32"
    syslinux_has "cmd.c32"
    syslinux_has "cpuid.c32"
    syslinux_has "disk.c32"
    syslinux_has "host.c32"
    syslinux_has "kbdmap.c32"
    syslinux_has "ls.c32"
    syslinux_has "lua.c32"
    syslinux_has "rosh.c32"
    syslinux_has "sysdump.c32"
    syslinux_has "vesamenu.c32"

# Add needed libraries for syslinux v5 and hdt
    syslinux_has "ldlinux.c32"
    syslinux_has "libcom32.c32"
    syslinux_has "libgpl.c32"
    syslinux_has "libmenu.c32"
    syslinux_has "libutil.c32"

if [ -r $(get_template "rear.help") ]; then
        cp $v $(get_template "rear.help") "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/rear.help" >/dev/null
        syslinux_write <<EOF
say F1 - Show help
F1 /boot/syslinux/rear.help
menu tabmsg Press [Tab] to edit options or [F1] for help
EOF
    fi

# Use menu system, if menu.c32 is available
    if syslinux_has "menu.c32"; then
        syslinux_write "default menu.c32"
    fi

syslinux_write <<EOF
timeout 300
#noescape 1

menu title $PRODUCT v$VERSION
EOF

if [[ "$FEATURE_SYSLINUX_INCLUDE" ]]; then
    syslinux_write <<EOF
### Add custom items to your configuration by creating custom.cfg
include custom.cfg

### Include generated configuration
include /rear/syslinux.cfg
EOF
else
    cat "$BUILD_DIR/outputfs/rear/syslinux.cfg" >&4
fi

syslinux_write <<EOF
menu separator

label -
    menu label Other actions
    menu disable

EOF

if [[ "$FEATURE_SYSLINUX_MENU_HELP" && -r $(get_template "rear.help") ]]; then
        syslinux_write <<EOF
label help
    menu label ^Help for Relax-and-Recover
    text help
Information about Relax-and-Recover and steps for recovering your system
    endtext
    menu help rear.help

EOF
    fi

# Use chain booting for booting disk, if chain.c32 is available
    if syslinux_has "chain.c32" ; then
        # Boot from boothd0 (which is usually the same USB disk where this syslinux boot menue is currently shown)
        # only as boot default when that was explicitly specified by the user (results usually a boot loop):
        if test "boothd0" = "$USB_BIOS_BOOT_DEFAULT" ; then
            syslinux_write <<EOF
ontimeout boothd0
label boothd0
    say boothd0 - boot first local disk
    menu label Boot ^First local disk (hd0)
    text help
Usually hd0 is the USB disk wherefrom currently is booted
    endtext
    menu default
    kernel chain.c32
    append hd0

label boothd1
    say boothd1 - boot second local disk
    menu label Boot ^Second local disk (hd1)
    text help
Usually hd1 is the local harddisk
    endtext
    kernel chain.c32
    append hd1

EOF
        else
            # Boot from boothd1 (which is usually the local harddisk) by default (i.e. when USB_BIOS_BOOT_DEFAULT is not boothd0):
            syslinux_write <<EOF
label boothd0
    say boothd0 - boot first local disk
    menu label Boot ^First local disk (hd0)
    text help
Usually hd0 is the USB disk wherefrom currently is booted
    endtext
    kernel chain.c32
    append hd0

ontimeout boothd1
label boothd1
    say boothd1 - boot second local disk
    menu label Boot ^Second local disk (hd1)
    text help
Usually hd1 is the local harddisk
    endtext
    menu default
    kernel chain.c32
    append hd1

EOF
        fi

syslinux_write <<EOF
label bootlocal
    say bootlocal - boot second local bios disk
    menu label Boot ^BIOS disk (0x81)
    text help
Try this when booting from local disk does not work
    endtext
    localboot 0x81

EOF
    else
        # Fallback when chain.c32 is not available:
        syslinux_write <<EOF
ontimeout bootlocal
label bootlocal
    say bootlocal - boot second local bios disk
    menu label Boot ^BIOS disk (0x81)
    localboot 0x81

EOF
    fi

syslinux_write <<EOF
label bootnext
    menu label Boot ^Next device
    text help
Boot from the next device in the BIOS boot order list
    endtext
    localboot -1

EOF

if syslinux_has "hdt.c32"; then
        if [ -r "/usr/share/hwdata/pci.ids" ]; then
            cp $v "/usr/share/hwdata/pci.ids" "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/pci.ids" >/dev/null
        elif [ -r "/usr/share/pci.ids" ]; then
            cp $v "/usr/share/pci.ids" "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/pci.ids" >/dev/null
        fi
        if [ -r "/lib/modules/$(uname -r)/modules.pcimap" ]; then
            cp $v "/lib/modules/$KERNEL_VERSION/modules.pcimap" "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/modules.pcimap" >/dev/null
        fi
        syslinux_write <<EOF
label hdt
    say hdt - Hardware Detection Tool
    menu label Hardware ^Detection tool
    text help
Information about your current hardware configuration
    endtext
    kernel hdt.c32

EOF
    fi

# Because usr/sbin/rear sets 'shopt -s nullglob' the 'ls' command will list all files
    # in the current working directory if nothing matches the globbing pattern '/boot/memtest86+-*'
    # which results '.' in MEMTEST_BIN (the plain 'ls -d' output in the current working directory).
    # You need the memtest86+ package installed for this to work
    MEMTEST_BIN=$(ls -d /boot/memtest86+-* 2>/dev/null | tail -1)
    if [[ "$MEMTEST_BIN" != "." && -r "$MEMTEST_BIN" ]]; then
        cp $v "$MEMTEST_BIN" "$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/memtest" >/dev/null
        syslinux_write <<EOF
label memtest
    say memtest - Run memtest86+
    menu label ^Memory test
    text help
Test your memory for problems
    endtext
    kernel memtest
    append -

EOF
    fi

#    echo -e "label -\n    menu label ^Exit menu\n    menu quit\n" >&4

if syslinux_has "reboot.c32"; then
        syslinux_write <<EOF
label reboot
    say reboot - Reboot the system
    menu label ^Reboot system
    text help
Reboot the system now
    endtext
    kernel reboot.c32

EOF
    fi

if syslinux_has "poweroff.com"; then
        syslinux_write <<EOF
label poweroff
    say poweroff - Power off the system
    menu label ^Power off system
    text help
Power off the system now
    endtext
    kernel poweroff.com

EOF
    elif syslinux_has "poweroff.c32"; then
        syslinux_write <<EOF
label poweroff
    say poweroff - Power off the system
    menu label ^Power off system
    text help
Power off the system now
    endtext
    kernel poweroff.c32

EOF
    fi

} 4>"$BUILD_DIR/outputfs/$SYSLINUX_PREFIX/extlinux.conf"

Log "Created extlinux configuration '$SYSLINUX_PREFIX/extlinux.conf'"

# vim: set et ts=4 sw=4

MR SKB